AVAPS-LOG,2018-08-04 16:43:25.981Z,10.744,,Serial port initialization complete: no errors.
AVAPS-LOG,2018-08-04 16:43:30.214Z,14.977,,GPS Reference Receiver UART 1 configuration commands sent
AVAPS-LOG,2018-08-04 16:43:34.618Z,19.380,,GPS Reference Receiver UART 2 configuration commands sent
AVAPS-LOG,2018-08-04 16:43:38.309Z,23.071,,Serial port initialization complete: no errors.
AVAPS-LOG,2018-08-04 16:43:38.834Z,23.596,,BYTE COUNT MISMATCH from SONDE INTERFACE CARD card after command IPNG on COM 19 -- Expected Length: 3 Actual Length: 8 Received String: ! AVAPS-LOG,2018-08-04 16:43:39.842Z,24.604,,Serial Read TIMEOUT from SONDE INTERFACE CARD card after command IPNG on COM 19
AVAPS-LOG,2018-08-04 16:43:48.146Z,32.909,,PC Clock set to: 2018-08-04 16:43:48.147 using GPS Reference Receiver data - PC Clock error was: -6.447 sec
AVAPS-LOG,2018-08-04 16:44:43.227Z,87.989,,Automated System Tests: An out of range voltage was detected on the Chassis Power 
 Supply card.  WARNING !  This is a potentially serious error 
 and indicates a problem with either the Power Supply card or 
 Sonde  Interface card.  Procede only if hardware spares are not 
 available for these cards.  The system may not operate properly!
AVAPS-LOG,2018-08-04 16:44:43.258Z,88.020,,Spectrum Analyzer program started
AVAPS-LOG,2018-08-04 16:44:43.258Z,88.020,,Aircraft Data Acq program started
AVAPS-LOG,2018-08-04 16:44:43.300Z,88.062,,Spectrum Analyzer Data Acq data log file created
AVAPS-LOG,2018-08-04 16:44:43.327Z,88.089,,Sounding Supervisor program started
AVAPS-LOG,2018-08-04 16:44:43.331Z,88.093,,Aircraft Data Acq data log file created
AVAPS-LOG,2018-08-04 16:44:43.429Z,88.191,,GPS Reference Data Acq (NMEA) program started
AVAPS-LOG,2018-08-04 16:44:44.160Z,88.923,,PC Clock set to: 2018-08-04 16:44:44.160 using GPS Reference Receiver data - PC Clock error was: -0.014 sec
AVAPS-LOG,2018-08-04 16:44:47.453Z,92.215,,Sounding Supervisor program ended by operator
AVAPS-LOG,2018-08-04 16:44:47.541Z,92.303,,GPS Reference Data Acq (NMEA) program ended
AVAPS-LOG,2018-08-04 16:44:48.011Z,92.773,,Spectrum Analyzer program ended
AVAPS-LOG,2018-08-04 16:44:48.915Z,93.677,,Aircraft Data Acq program ended
AVAPS-LOG,2018-08-04 17:32:33.107Z,10.716,,Serial port initialization complete: no errors.
AVAPS-LOG,2018-08-04 17:32:37.340Z,14.949,,GPS Reference Receiver UART 1 configuration commands sent
AVAPS-LOG,2018-08-04 17:32:41.744Z,19.353,,GPS Reference Receiver UART 2 configuration commands sent
AVAPS-LOG,2018-08-04 17:32:45.466Z,23.075,,Serial port initialization complete: no errors.
AVAPS-LOG,2018-08-04 17:32:44.178Z,21.788,,PC Clock set to: 2018-08-04 17:32:44.179 using GPS Reference Receiver data - PC Clock error was: 4.059 sec
AVAPS-LOG,2018-08-04 17:33:10.877Z,48.486,,Automated System Tests: An out of range voltage was detected on the Chassis Power 
 Supply card.  WARNING !  This is a potentially serious error 
 and indicates a problem with either the Power Supply card or 
 Sonde  Interface card.  Procede only if hardware spares are not 
 available for these cards.  The system may not operate properly!
AVAPS-LOG,2018-08-04 17:33:10.906Z,48.515,,Spectrum Analyzer program started
AVAPS-LOG,2018-08-04 17:33:10.906Z,48.515,,Aircraft Data Acq program started
AVAPS-LOG,2018-08-04 17:33:10.948Z,48.557,,Spectrum Analyzer Data Acq data log file created
AVAPS-LOG,2018-08-04 17:33:10.980Z,48.589,,Sounding Supervisor program started
AVAPS-LOG,2018-08-04 17:33:10.985Z,48.594,,Aircraft Data Acq data log file created
AVAPS-LOG,2018-08-04 17:33:11.079Z,48.688,,GPS Reference Data Acq (NMEA) program started
AVAPS-LOG,2018-08-04 17:33:12.149Z,49.758,,PC Clock set to: 2018-08-04 17:33:12.149 using GPS Reference Receiver data - PC Clock error was: -0.002 sec
AVAPS-LOG,2018-08-04 22:06:22.633Z,16440.242,,Serial Read TIMEOUT from 400 MHz RECEIVER card after command RSD on COM 18
AVAPS-LOG,2018-08-04 22:06:28.629Z,16446.238,,Serial Read TIMEOUT from 400 MHz RECEIVER card after command RSD on COM 18
AVAPS-LOG,2018-08-04 22:06:34.630Z,16452.239,,Serial Read